What is Carbon Filtering?
Carbon filtering is basically the method of filtering that always makes use of a bed of some activated carbon for the sake of removing the contaminants and impurities from the water by using the chemical adsorption. Each and every granule of the carbon always provides a large surface area structure for allowing the contaminants the maximum possible exposure to the media of filtration. This activated Carbon filtration is however, not capable of removing each and every type of the contaminant from the water. For instance, some things that can’t be removed include the sodium, fluoride, microbes as well as the nitrates. The softening of the water cannot be done also with the AC filters. Moreover, the heavy metals like the lead can only be removed with the best activated carbon water filters that are usually really very difficult to find.
Working of Carbon Filters:
So many people know this really well that the active charcoal carbon filters are one of the most effective things for removing the chlorine, sediment, taste as well as the odor from the drinking water. However, they are not so good and effective at removing the minerals, salts, and some dissolved inorganic compounds from the water most of the times. There are so many Doulton ultracarb water filter system review that shows that this treatment are basically used for two water treatment purposes and they include:
Removal of Chlorine:
The activated carbon can also be used for removing the chlorine with some little degradation or even the damage to the carbon. The process of dechlorination occurs all of sudden and results in the high flow rates. However, this process always requires some kind of extensive amount of the surface area and the organics in the water eventually fill up and then block the pores of the carbon. Then the AC filter will always need replacing as the ability of dechlorination of the water also declines slowly. One of the best advantages of using the AC is its cheap cost of operating once the system is installed.
Removal of Organic Matter:
As the water always passes through some kind of activated carbon filter, the organic particles as well as the chemicals are trapped inside it with the help of the process that is known as adsorption. This process depends usually depend on five key factors that include:
- Physical properties of the activated carbon.
- The chemical makeup of the carbon source.
- Chemical makeup as well as the concentration of the contaminant in water.
- Water pH and temperature.
- The length of time the water is exposed to the activated carbon filter.